HS-6303C Three Phase Energy Meter Test Bench
Features
1) The bench accords with the standard of “ IEC 60736:1982 testing
equipment for electrical energy meters”, “IEC 62053”
2) The bench can be used to test single phase energy meter (up to
0.05 class)
3) The bench can do warm up test, starting test, no load test(creep test), error
test(accuracy test) of the measurements.
4) The bench is using the PWM ,technology to amplify
voltage/current output, the high efficiency at >85%, and lower
the heat. The PWM can check the malfunction checking, preset,
alarm, and protection.
5) The signal source is using the newest digital controlled sine
wave technology for frequency, amplitude and phase adjust.
6) The bench is using comparison technology to test the error of
energy meters.
7) The bench is using the error processor system to calculate the
error of each energy meter by the sub-error system which can be
connected by the internal RS485.
8) Different constant energy meter can be tested at one time.
9) The bench can choose to operate by keyboard which is very
convenient. The working status of bench can be seen very clear and
easy operation.
Technical Specification
1) The test bench accuracy class: 0.1/0.05 class
2) Reference standard energy meter:
HS 5300 three phase reference standard energy meter
Accuracy class: 0.1/0.05
3) Voltage amplifier:
Output voltage range: 3×0~300V (Phase to Netural );
Output maximum power: 200VA
Resolution: 0.01%;
Stability: better than 0.05%/3 min (time base 5S);
Distortion factor: < 0.5% at linear load;
Frequency range: 45Hz~65Hz;
Power efficiency: more than 85%;
Ambient temperature:10℃~50℃
Electronic overload and short-circuit protection.
4) Current amplifier:
Output current: range: 3×1mA~120A;
Output maximum power: 300VA
Resolution: 0.01%;
Stability: better than 0.05%/3 min (time base 5S);
Distortion factor: < 0.5% at linear load;
Frequency range: 45Hz~65Hz;
Power efficiency: greater than 85%;
Ambient temperature:10℃~50℃
Electronic overload protection and security for open current
circuit.
5) Phase Angle: 0°~360° , resolution of phase angle setting: 0.1°;
6) Output frequency range: 45Hz~65Hz; resolution: 0.01Hz
7) Output stability of power: <0.05% (180S)
8) Numbers of calibrated energy meter: 6
9) Input power: 120/220/240V +/-15%, 50/60Hz; power consumption:
Max.1000VA
10) Dimension: L2000 × W800 × H1000 mm
