HS-6103 Single-phase energy meter test bench.

This Bench Comprises of PWM power source,standard digital energy meter,error processor,and PC processing software.Can test 3-60 Variors Energy Meter.
Technical Parameters:
1.Accuracy Class:0.05/0.1/0.2 %
2.Standard Energy meter: HS-5100 Single-Phase Wide-measurement-range Energy Meter,Accuracy class:0.05/0.1/0.2 ; Multi-path Voltage transformer: Accuracy class:0.01. Rated load per path: 10 VA
3.Voltage Range(V): 220V(240V Option) Output Range: 0~125%,Resolution:0.01% full range
4.Current Range(A):0.1 ~100A(200A option) Output Range:0~120%,Resolution:0.0001A(Min)
5. Phase Angle:0~360.Resolution of phase angle setting:0.01
6. Frequency: 45Hz ~65Hz,Resolution:0.01Hz
7.Output waveform distortion:Both Voltage and Current 0.5%
8.Output Voltage,current and power stability: 0.05% /3min
9.Output Capacity:
Current: 1000VA(120A)
Voltage: 400 VA(24 meter testing stations)
If the number of energy meter to be tested is increased whenever necessary,its maximum load may be extended to current:1800VA, and Voltage:1000VA
10.Load Characteristics: Resistive,inductive and Capacitive(less than 4uF)
11.Starting current output:5mA(Min);Accuracy:5%;Starting power:Accuracy 5%
12.Test Stations: 24/48 (Standard), also 3-60 option.
13.Testing function: Accuracy testing,Creep testing,Starting up testing,Harmonic testing,repeatability testing,influencing testing,dial testing etc.
14.Input power supply:220V AC 10%,50Hz;Max power consumption:1500VA(24 energy meter testing stations)
15. RS485/Rs-232
16. GPS timing system, HS-1012 standard clock(Option)

QUICK CONNECTOR(SINGLE LOOP)

REFERENCE METER (HS-5100)

We are the manufacturer of HS Series Single & Three-Phase Energy meter Test Bench.