HS-6303E THREE PHASE ENERGY METER TEST BENCH-16 Position
SUIT FOR "CT &DC METER" & Single-phase/Three-phase meter
1.OVERVIEW
HS-6303E three-phase energy meter testing bench adopts SPWM digital power
source technology, comprises high-grade standard digital watt-hour meter, multi-path voltage transformer,
can implement multi-station high accuracy error testing.
This testing bench configurates humanized PC processing software, can provide integrated solution of the energy meter automatic check. Meanwhile, it
provides the requested DLL of the second development, has improved
the self-control and management for the bench by the customer.
This testing bench can be widely used for the energy meter
measurement and testing in electric power, water conservancy,
traffic transportation and colliery departments, as well as the
energy meter testing and production of the energy meter
manufacturer.
This series of the testing bench can test all kind of single phase energy meters, single phase
multi-function meters, single phase intelligent meters, other
meters with special wiring and ANSI standard meter. It is an ideal
new generation multi-station energy meter testing device.
2. APPLICABLE STANDARDS
IEC 60736 Testing equipment for electrical energy meters.
3. GENERAL TECHNICAL SPECIFICATION
3.1 Power Source
Voltage amplifier
| No. | DESCRIPTION | MEASURMENT |
| 1 | Electronic protection against Overload and Short Circuit |
| 2 | LED indication for faults like overload,short circuit and power
supply failure will display |
| 3 | Efficiency | Better than 85%. |
| 4 | Stability | ＜0.05%/120s |
| 5 | Distortion factor | < 0.5 %. |
| 6 | Provision for super-imposing of harmonics in the range of | 2 nd to 21th harmonic |
| 7 | Test voltage range | 30~300V |
| 8 | Output Power | Not less than 1000VA |
| 9 | Accuracy of the test setting amplitude | 0.05 % |
| 10 | Accuracy of the test setting phase adjustment | 0.01 ° |
Current amplifier
| No. | DESCRIPTION | MEASURMENT |
| 1 | Electronic protection against Overload and Short Circuit |
| 2 | LED indication for faults like overload,short circuit and power
supply failure will display |
| 3 | Efficiency | Better than 85%. |
| 4 | Stability | ＜0.05%/120s |
| 5 | Distortion factor | < 0.5 %. |
| 6 | Provision for super-imposing of harmonics in the range of | 2 nd to 21th harmonic |
| 7 | Test current range | 1mA~120A |
| 8 | Output Power | Not less than 1500VA |
| 9 | Accuracy of the test setting amplitude | 0.05 % |
| 10 | Accuracy of the test setting phase adjustment | 0.01 °
|
3.2 Reference Meter(Standard Meter)-HS-5302 Three Phase Reference Meter
3.3 Isolated Current Transformer
ISOLATED CURRENT TRANSFORMER(ICT)
3.4 CALIBRATION CERTIFICATION
As customer's requirement,we can supply 3rd part calibration
certification. with CNAS mark.
ASK FOR PRICE.
